Can the Jackery Explorer 500 v2 Run a Circular Saw?

Updated 2026-10-17 · No

No. A circular saw draws about 1400W, more than the Jackery Explorer 500 v2’s 500W continuous AC output. The inverter will overload and shut off as soon as it switches on.

The numbers

Battery capacity512Wh (LFP)
Usable energy435Wh (85% via AC outlets)
Continuous AC output500W
Surge rating1000W
Circular saw running watts1400W
Startup watts2600W
Average draw1400W
Estimated runtimeWon’t run
Energy per day of typical use350Wh

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your circular saw and enter its real wattage.

Recharging with solar

The Jackery Explorer 500 v2 accepts up to 200W of solar input. In real conditions that harvests about 750Wh on a sunny day (5 peak-sun hours).

Tips

  • Corded 7¼-inch saws pull a big inrush when the blade spins up. That surge, not total energy, decides whether it works.
  • The Jackery Explorer 500 v2 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running a circular saw

Power stationCapacityOutputRuntimeVerdict
Goal Zero Yeti 500X505Wh300WWon’t runNo
EcoFlow River 2 Max512Wh500WWon’t runNo
Anker 535 PowerHouse512Wh500WWon’t runNo
DJI Power 500512Wh1000WWon’t runNo
Jackery Explorer 500518Wh500WWon’t runNo
EcoFlow River 2 Pro768Wh800WWon’t runNo
Anker SOLIX C800 Plus768Wh1200WWon’t runNo
Bluetti AC70768Wh1000WWon’t runNo

Compare all power stations for a circular saw →

FAQ

How long does the Jackery Explorer 500 v2 take to recharge with solar?

With its maximum 200W of solar input it refills in about 3.4 hours of strong sun. A single 200W panel is enough to max out its solar input.

Which power station can run a circular saw?

The EcoFlow Delta 2 (1024Wh, 1800W output) can, for about 37 minutes. See the comparison table below for more options.

More with the Jackery Explorer 500 v2

Everything the Jackery Explorer 500 v2 can run →