Can the DJI Power 500 Run a Circular Saw?

Updated 2026-10-17 · No

No. A circular saw draws about 1400W, more than the DJI Power 500’s 1000W continuous AC output. The inverter will overload and shut off as soon as it switches on.

The numbers

Battery capacity512Wh (LFP)
Usable energy435Wh (85% via AC outlets)
Continuous AC output1000W
Surge ratingNot published
Circular saw running watts1400W
Startup watts2600W
Average draw1400W
Estimated runtimeWon’t run
Energy per day of typical use350Wh

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your circular saw and enter its real wattage.

Recharging with solar

The DJI Power 500 accepts up to 300W of solar input. In real conditions that harvests about 1.1 kWh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.

Tips

  • Corded 7¼-inch saws pull a big inrush when the blade spins up. That surge, not total energy, decides whether it works.
  • The DJI Power 500 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running a circular saw

Power stationCapacityOutputRuntimeVerdict
Jackery Explorer 300 Plus288Wh300WWon’t runNo
Goal Zero Yeti 500X505Wh300WWon’t runNo
EcoFlow River 2 Max512Wh500WWon’t runNo
Anker 535 PowerHouse512Wh500WWon’t runNo
Jackery Explorer 500518Wh500WWon’t runNo
EcoFlow River 2 Pro768Wh800WWon’t runNo
Anker SOLIX C800 Plus768Wh1200WWon’t runNo
Bluetti AC70768Wh1000WWon’t runNo

Compare all power stations for a circular saw →

FAQ

How long does the DJI Power 500 take to recharge with solar?

With its maximum 300W of solar input it refills in about 2.3 hours of strong sun. With a single 200W panel, expect about 3.4 hours of full sun.

Which power station can run a circular saw?

The EcoFlow Delta 2 (1024Wh, 1800W output) can, for about 37 minutes. See the comparison table below for more options.

More with the DJI Power 500

Everything the DJI Power 500 can run →