Can the Goal Zero Yeti 500X Run a Circular Saw?

Updated 2026-10-17 · No

No. A circular saw draws about 1400W, more than the Goal Zero Yeti 500X’s 300W continuous AC output. The inverter will overload and shut off as soon as it switches on.

The numbers

Battery capacity505Wh (NMC)
Usable energy429Wh (85% via AC outlets)
Continuous AC output300W
Surge rating600W
Circular saw running watts1400W
Startup watts2600W
Average draw1400W
Estimated runtimeWon’t run
Energy per day of typical use350Wh

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your circular saw and enter its real wattage.

Recharging with solar

The Goal Zero Yeti 500X accepts up to 120W of solar input. In real conditions that harvests about 450Wh on a sunny day (5 peak-sun hours).

Tips

  • Corded 7¼-inch saws pull a big inrush when the blade spins up. That surge, not total energy, decides whether it works.
  • The Goal Zero Yeti 500X uses NMC cells, which are lighter but rated for fewer cycles (typically 500–800) than newer LFP models.

Other power stations running a circular saw

Power stationCapacityOutputRuntimeVerdict
Jackery Explorer 300 Plus288Wh300WWon’t runNo
EcoFlow River 2 Max512Wh500WWon’t runNo
Anker 535 PowerHouse512Wh500WWon’t runNo
DJI Power 500512Wh1000WWon’t runNo
Jackery Explorer 500518Wh500WWon’t runNo
EcoFlow River 2 Pro768Wh800WWon’t runNo
Anker SOLIX C800 Plus768Wh1200WWon’t runNo
Bluetti AC70768Wh1000WWon’t runNo

Compare all power stations for a circular saw →

FAQ

How long does the Goal Zero Yeti 500X take to recharge with solar?

With its maximum 120W of solar input it refills in about 5.6 hours of strong sun. A single 200W panel is enough to max out its solar input.

Which power station can run a circular saw?

The EcoFlow Delta 2 (1024Wh, 1800W output) can, for about 37 minutes. See the comparison table below for more options.

More with the Goal Zero Yeti 500X

Everything the Goal Zero Yeti 500X can run →