Can the Bluetti AC70 Run a Circular Saw?

Updated 2026-10-17 · No

No. A circular saw draws about 1400W, more than the Bluetti AC70’s 1000W continuous AC output. The inverter will overload and shut off as soon as it switches on.

The numbers

Battery capacity768Wh (LFP)
Usable energy653Wh (85% via AC outlets)
Continuous AC output1000W
Surge rating1500W
Circular saw running watts1400W
Startup watts2600W
Average draw1400W
Estimated runtimeWon’t run
Energy per day of typical use350Wh

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your circular saw and enter its real wattage.

Recharging with solar

The Bluetti AC70 accepts up to 500W of solar input. In real conditions that harvests about 1.9 kWh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.

Tips

  • Corded 7¼-inch saws pull a big inrush when the blade spins up. That surge, not total energy, decides whether it works.
  • The Bluetti AC70 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running a circular saw

Power stationCapacityOutputRuntimeVerdict
Jackery Explorer 500518Wh500WWon’t runNo
EcoFlow River 2 Pro768Wh800WWon’t runNo
Anker SOLIX C800 Plus768Wh1200WWon’t runNo
Jackery Explorer 10001002Wh1000WWon’t runNo
EcoFlow Delta 21024Wh1800W37 minutesYes
DJI Power 10001024Wh2200W37 minutesYes
Anker SOLIX C10001056Wh1800W38 minutesStartup risk
Jackery Explorer 1000 v21070Wh1500W39 minutesYes

Compare all power stations for a circular saw →

FAQ

How long does the Bluetti AC70 take to recharge with solar?

With its maximum 500W of solar input it refills in about 2 hours of strong sun. With a single 200W panel, expect about 5.1 hours of full sun.

Which power station can run a circular saw?

The EcoFlow Delta 2 (1024Wh, 1800W output) can, for about 37 minutes. See the comparison table below for more options.

More with the Bluetti AC70

Everything the Bluetti AC70 can run →