How Many Times Can the Bluetti EB3A Charge a Smartphone?
Updated 2026-10-17 · Yes
The Bluetti EB3A can fully charge a smartphone about 14 times. A typical smartphone battery holds 15Wh, and charging it takes roughly 17Wh once losses are included.
The numbers
| Battery capacity | 268Wh (LFP) |
|---|---|
| Usable energy | 247Wh (92% via 12V/USB DC output) |
| Continuous AC output | 600W |
| Surge rating | 1200W |
| Smartphone battery | 15Wh |
| Energy per charge | 17Wh |
| Full charges | 14 charges |
268Wh × 0.92 = 247Wh usable ÷ (15Wh × 1.15) = 14.3 charges
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your smartphone and enter its real wattage.
Recharging with solar
The Bluetti EB3A accepts up to 200W of solar input. In real conditions that harvests about 750Wh on a sunny day (5 peak-sun hours).
Tips
- Most phones hold 12–19Wh. Charge from a USB port rather than the AC outlet to skip inverter losses.
- Running it from the Bluetti EB3A’s DC port instead of the AC outlet avoids inverter losses: about 19Wh more usable energy.
- The Bluetti EB3A uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a smartphone
| Power station | Capacity | Output | Charges | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | 13 charges | Yes |
| EcoFlow River 2 | 256Wh | 300W | 14 charges | Yes |
| Jackery Explorer 240 v2 | 256Wh | 300W | 14 charges | Yes |
| Jackery Explorer 300 Plus | 288Wh | 300W | 15 charges | Yes |
| Anker SOLIX C300 | 288Wh | 300W | 15 charges | Yes |
| Goal Zero Yeti 500X | 505Wh | 300W | 27 charges | Yes |
| EcoFlow River 2 Max | 512Wh | 500W | 27 charges | Yes |
| Anker 535 PowerHouse | 512Wh | 500W | 27 charges | Yes |
FAQ
How long does the Bluetti EB3A take to recharge with solar?
With its maximum 200W of solar input it refills in about 1.8 hours of strong sun. A single 200W panel is enough to max out its solar input.