How Many Times Can the Bluetti EB3A Charge an Electric Scooter?

Updated 2026-10-17 · Partial

Not fully. The Bluetti EB3A gets an electric scooter to about 44% before it runs flat. A typical electric scooter battery holds 450Wh, and charging it takes roughly 518Wh once losses are included.

The numbers

Battery capacity268Wh (LFP)
Usable energy228Wh (85% via AC outlets)
Continuous AC output600W
Surge rating1200W
Electric scooter battery450Wh
Energy per charge518Wh
Full chargesless than one full charge

268Wh × 0.85 = 228Wh usable ÷ (450Wh × 1.15) = 0.4 charges

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your electric scooter and enter its real wattage.

Recharging with solar

The Bluetti EB3A accepts up to 200W of solar input. In real conditions that harvests about 750Wh on a sunny day (5 peak-sun hours).

Tips

  • Commuter scooters like the Segway Ninebot Max hold around 450–550Wh.
  • The Bluetti EB3A uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running an electric scooter

Power stationCapacityOutputChargesVerdict
EcoFlow River 3245Wh300Wless than one full chargePartial
EcoFlow River 2256Wh300Wless than one full chargePartial
Jackery Explorer 240 v2256Wh300Wless than one full chargePartial
Jackery Explorer 300 Plus288Wh300Wless than one full chargePartial
Anker SOLIX C300288Wh300Wless than one full chargePartial
Goal Zero Yeti 500X505Wh300Wless than one full chargePartial
EcoFlow River 2 Max512Wh500Wless than one full chargePartial
Anker 535 PowerHouse512Wh500Wless than one full chargePartial

Compare all power stations for an electric scooter →

FAQ

How long does the Bluetti EB3A take to recharge with solar?

With its maximum 200W of solar input it refills in about 1.8 hours of strong sun. A single 200W panel is enough to max out its solar input.

More with the Bluetti EB3A

Everything the Bluetti EB3A can run →