How Many Times Can the Anker SOLIX C300 Charge an Electric Scooter?
Updated 2026-10-17 · Partial
Not fully. The Anker SOLIX C300 gets an electric scooter to about 47% before it runs flat. A typical electric scooter battery holds 450Wh, and charging it takes roughly 518Wh once losses are included.
The numbers
| Battery capacity | 288Wh (LFP) |
|---|---|
| Usable energy | 245Wh (85% via AC outlets) |
| Continuous AC output | 300W |
| Surge rating | 600W |
| Electric scooter battery | 450Wh |
| Energy per charge | 518Wh |
| Full charges | less than one full charge |
288Wh × 0.85 = 245Wh usable ÷ (450Wh × 1.15) = 0.5 charges
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your electric scooter and enter its real wattage.
Recharging with solar
The Anker SOLIX C300 accepts up to 100W of solar input. In real conditions that harvests about 375Wh on a sunny day (5 peak-sun hours).
Tips
- Commuter scooters like the Segway Ninebot Max hold around 450–550Wh.
- The Anker SOLIX C300 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running an electric scooter
| Power station | Capacity | Output | Charges | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | less than one full charge | Partial |
| EcoFlow River 2 | 256Wh | 300W | less than one full charge | Partial |
| Jackery Explorer 240 v2 | 256Wh | 300W | less than one full charge | Partial |
| Bluetti EB3A | 268Wh | 600W | less than one full charge | Partial |
| Jackery Explorer 300 Plus | 288Wh | 300W | less than one full charge | Partial |
| Goal Zero Yeti 500X | 505Wh | 300W | less than one full charge | Partial |
| EcoFlow River 2 Max | 512Wh | 500W | less than one full charge | Partial |
| Anker 535 PowerHouse | 512Wh | 500W | less than one full charge | Partial |
FAQ
How long does the Anker SOLIX C300 take to recharge with solar?
With its maximum 100W of solar input it refills in about 3.8 hours of strong sun. A single 200W panel is enough to max out its solar input.