How Many Times Can the Anker SOLIX C300 Charge an E-Bike Battery?

Updated 2026-10-17 · Partial

Not fully. The Anker SOLIX C300 gets an e-bike battery to about 43% before it runs flat. A typical e-bike battery holds 500Wh, and charging it takes roughly 575Wh once losses are included.

The numbers

Battery capacity288Wh (LFP)
Usable energy245Wh (85% via AC outlets)
Continuous AC output300W
Surge rating600W
E-bike battery500Wh
Energy per charge575Wh
Full chargesless than one full charge

288Wh × 0.85 = 245Wh usable ÷ (500Wh × 1.15) = 0.4 charges

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your e-bike battery and enter its real wattage.

Recharging with solar

The Anker SOLIX C300 accepts up to 100W of solar input. In real conditions that harvests about 375Wh on a sunny day (5 peak-sun hours).

Tips

  • Most e-bike batteries are 400–750Wh. Their chargers draw 100–250W.
  • The Anker SOLIX C300 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running an e-bike battery

Power stationCapacityOutputChargesVerdict
EcoFlow River 3245Wh300Wless than one full chargePartial
EcoFlow River 2256Wh300Wless than one full chargePartial
Jackery Explorer 240 v2256Wh300Wless than one full chargePartial
Bluetti EB3A268Wh600Wless than one full chargePartial
Jackery Explorer 300 Plus288Wh300Wless than one full chargePartial
Goal Zero Yeti 500X505Wh300Wless than one full chargePartial
EcoFlow River 2 Max512Wh500Wless than one full chargePartial
Anker 535 PowerHouse512Wh500Wless than one full chargePartial

Compare all power stations for an e-bike battery →

FAQ

How long does the Anker SOLIX C300 take to recharge with solar?

With its maximum 100W of solar input it refills in about 3.8 hours of strong sun. A single 200W panel is enough to max out its solar input.

More with the Anker SOLIX C300

Everything the Anker SOLIX C300 can run →