How Many Times Can the Bluetti EB3A Charge a Drone Battery?
Updated 2026-10-17 · Yes
The Bluetti EB3A can fully charge a drone battery about 2.6 times. A typical drone battery holds 77Wh, and charging it takes roughly 89Wh once losses are included.
The numbers
| Battery capacity | 268Wh (LFP) |
|---|---|
| Usable energy | 228Wh (85% via AC outlets) |
| Continuous AC output | 600W |
| Surge rating | 1200W |
| Drone battery | 77Wh |
| Energy per charge | 89Wh |
| Full charges | 2.6 charges |
268Wh × 0.85 = 228Wh usable ÷ (77Wh × 1.15) = 2.6 charges
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your drone battery and enter its real wattage.
Recharging with solar
The Bluetti EB3A accepts up to 200W of solar input. In real conditions that harvests about 750Wh on a sunny day (5 peak-sun hours).
Tips
- A DJI Mavic 3 battery is 77Wh; Mini-series batteries are about 30Wh.
- The Bluetti EB3A uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a drone battery
| Power station | Capacity | Output | Charges | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | 2.4 charges | Yes |
| EcoFlow River 2 | 256Wh | 300W | 2.5 charges | Yes |
| Jackery Explorer 240 v2 | 256Wh | 300W | 2.5 charges | Yes |
| Jackery Explorer 300 Plus | 288Wh | 300W | 2.8 charges | Yes |
| Anker SOLIX C300 | 288Wh | 300W | 2.8 charges | Yes |
| Goal Zero Yeti 500X | 505Wh | 300W | 4.8 charges | Yes |
| EcoFlow River 2 Max | 512Wh | 500W | 4.9 charges | Yes |
| Anker 535 PowerHouse | 512Wh | 500W | 4.9 charges | Yes |
FAQ
How long does the Bluetti EB3A take to recharge with solar?
With its maximum 200W of solar input it refills in about 1.8 hours of strong sun. A single 200W panel is enough to max out its solar input.