Can the Anker SOLIX C300 Run a Circular Saw?

Updated 2026-10-17 · No

No. A circular saw draws about 1400W, more than the Anker SOLIX C300’s 300W continuous AC output. The inverter will overload and shut off as soon as it switches on.

The numbers

Battery capacity288Wh (LFP)
Usable energy245Wh (85% via AC outlets)
Continuous AC output300W
Surge rating600W
Circular saw running watts1400W
Startup watts2600W
Average draw1400W
Estimated runtimeWon’t run
Energy per day of typical use350Wh

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your circular saw and enter its real wattage.

Recharging with solar

The Anker SOLIX C300 accepts up to 100W of solar input. In real conditions that harvests about 375Wh on a sunny day (5 peak-sun hours).

Tips

  • Corded 7¼-inch saws pull a big inrush when the blade spins up. That surge, not total energy, decides whether it works.
  • The Anker SOLIX C300 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running a circular saw

Power stationCapacityOutputRuntimeVerdict
EcoFlow River 3245Wh300WWon’t runNo
EcoFlow River 2256Wh300WWon’t runNo
Jackery Explorer 240 v2256Wh300WWon’t runNo
Bluetti EB3A268Wh600WWon’t runNo
Jackery Explorer 300 Plus288Wh300WWon’t runNo
Goal Zero Yeti 500X505Wh300WWon’t runNo
EcoFlow River 2 Max512Wh500WWon’t runNo
Anker 535 PowerHouse512Wh500WWon’t runNo

Compare all power stations for a circular saw →

FAQ

How long does the Anker SOLIX C300 take to recharge with solar?

With its maximum 100W of solar input it refills in about 3.8 hours of strong sun. A single 200W panel is enough to max out its solar input.

Which power station can run a circular saw?

The EcoFlow Delta 2 (1024Wh, 1800W output) can, for about 37 minutes. See the comparison table below for more options.

More with the Anker SOLIX C300

Everything the Anker SOLIX C300 can run →