How Many Times Can the Jackery Explorer 500 Charge an Electric Scooter?

Updated 2026-10-17 · Partial

Not fully. The Jackery Explorer 500 gets an electric scooter to about 85% before it runs flat. A typical electric scooter battery holds 450Wh, and charging it takes roughly 518Wh once losses are included.

The numbers

Battery capacity518Wh (NMC)
Usable energy440Wh (85% via AC outlets)
Continuous AC output500W
Surge rating1000W
Electric scooter battery450Wh
Energy per charge518Wh
Full chargesless than one full charge

518Wh × 0.85 = 440Wh usable ÷ (450Wh × 1.15) = 0.9 charges

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your electric scooter and enter its real wattage.

Recharging with solar

The Jackery Explorer 500 accepts up to 100W of solar input. In real conditions that harvests about 375Wh on a sunny day (5 peak-sun hours).

Tips

  • Commuter scooters like the Segway Ninebot Max hold around 450–550Wh.
  • The Jackery Explorer 500 uses NMC cells, which are lighter but rated for fewer cycles (typically 500–800) than newer LFP models.

Other power stations running an electric scooter

Power stationCapacityOutputChargesVerdict
Jackery Explorer 300 Plus288Wh300Wless than one full chargePartial
Goal Zero Yeti 500X505Wh300Wless than one full chargePartial
EcoFlow River 2 Max512Wh500Wless than one full chargePartial
Anker 535 PowerHouse512Wh500Wless than one full chargePartial
DJI Power 500512Wh1000Wless than one full chargePartial
EcoFlow River 2 Pro768Wh800W1.3 chargesYes
Anker SOLIX C800 Plus768Wh1200W1.3 chargesYes
Bluetti AC70768Wh1000W1.3 chargesYes

Compare all power stations for an electric scooter →

FAQ

How long does the Jackery Explorer 500 take to recharge with solar?

With its maximum 100W of solar input it refills in about 6.9 hours of strong sun. A single 200W panel is enough to max out its solar input.

More with the Jackery Explorer 500

Everything the Jackery Explorer 500 can run →