How Long Will the EcoFlow River 3 Plus Run a Blender?
Updated 2026-10-17 · Yes
About 24 minutes. The EcoFlow River 3 Plus stores 286Wh, and a blender averages about 600W. That’s enough for about 8 typical 3-minute uses.
The numbers
| Battery capacity | 286Wh (LFP) |
|---|---|
| Usable energy | 243Wh (85% via AC outlets) |
| Continuous AC output | 600W |
| Surge rating | 1200W |
| Blender running watts | 600W |
| Startup watts | 900W |
| Average draw | 600W |
| Estimated runtime | 24 minutes |
| Energy per day of typical use | 30Wh |
286Wh × 0.85 = 243Wh usable ÷ 600W average = 0.4 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your blender and enter its real wattage.
Recharging with solar
The EcoFlow River 3 Plus accepts up to 220W of solar input. In real conditions that harvests about 825Wh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.
Solar can keep up. A blender uses about 30Wh a day at 0.05 hours of use, so with enough panels and good sun the EcoFlow River 3 Plus can run it indefinitely.
Tips
- Blenders run for seconds at a time, so energy is trivial; the motor surge at startup is what matters.
- The EcoFlow River 3 Plus uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a blender
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | Won’t run | No |
| EcoFlow River 2 | 256Wh | 300W | Won’t run | No |
| Jackery Explorer 240 v2 | 256Wh | 300W | Won’t run | No |
| Bluetti EB3A | 268Wh | 600W | 23 minutes | Yes |
| Jackery Explorer 300 Plus | 288Wh | 300W | Won’t run | No |
| Anker SOLIX C300 | 288Wh | 300W | Won’t run | No |
| Goal Zero Yeti 500X | 505Wh | 300W | Won’t run | No |
| EcoFlow River 2 Max | 512Wh | 500W | Won’t run | No |
FAQ
How long does the EcoFlow River 3 Plus take to recharge with solar?
With its maximum 220W of solar input it refills in about 1.7 hours of strong sun. With a single 200W panel, expect about 1.9 hours of full sun.