How Long Will the EcoFlow River 2 Run a Home Oxygen Concentrator?
Updated 2026-10-17 · Briefly
Medical equipment: these are estimates. Test your own setup and keep a backup plan.
The numbers
| Battery capacity | 256Wh (LFP) |
|---|---|
| Usable energy | 218Wh (85% via AC outlets) |
| Continuous AC output | 300W |
| Surge rating | 600W |
| Home oxygen concentrator running watts | 300W |
| Startup watts | 600W |
| Average draw | 300W |
| Estimated runtime | 44 minutes |
| Energy per day of typical use | 7.2 kWh |
256Wh × 0.85 = 218Wh usable ÷ 300W average = 0.7 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your home oxygen concentrator and enter its real wattage.
Recharging with solar
The EcoFlow River 2 accepts up to 110W of solar input. In real conditions that harvests about 413Wh on a sunny day (5 peak-sun hours).
Solar can’t fully keep up. A home oxygen concentrator uses about 7.2 kWh a day at 24 hours of use, more than the EcoFlow River 2’s best-case solar harvest. Solar will stretch the runtime but not sustain it.
Tips
- A 5 L/min stationary concentrator draws around 300W continuously. Always keep backup oxygen cylinders; a power station is not a substitute.
- The EcoFlow River 2 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a home oxygen concentrator
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | 42 minutes | Briefly |
| Jackery Explorer 240 v2 | 256Wh | 300W | 44 minutes | Briefly |
| Bluetti EB3A | 268Wh | 600W | 46 minutes | Briefly |
| Jackery Explorer 300 Plus | 288Wh | 300W | 49 minutes | Briefly |
| Anker SOLIX C300 | 288Wh | 300W | 49 minutes | Briefly |
| Goal Zero Yeti 500X | 505Wh | 300W | 1.4 hours | Yes |
| EcoFlow River 2 Max | 512Wh | 500W | 1.5 hours | Yes |
| Anker 535 PowerHouse | 512Wh | 500W | 1.5 hours | Yes |
FAQ
Will the EcoFlow River 2 run a home oxygen concentrator overnight?
No. At about 300W average it runs out after 44 minutes. For a full night you need at least 2900Wh of capacity.
How long does the EcoFlow River 2 take to recharge with solar?
With its maximum 110W of solar input it refills in about 3.1 hours of strong sun. A single 200W panel is enough to max out its solar input.
Is the EcoFlow River 2 safe for medical equipment?
These are estimates, not medical advice. Check your device’s actual power draw, test your setup before you rely on it, and always keep a backup plan approved by your doctor or equipment supplier.