How Long Will the EcoFlow River 2 Pro Run a Blender?
Updated 2026-10-17 · Yes
About 1.1 hours. The EcoFlow River 2 Pro stores 768Wh, and a blender averages about 600W. That’s enough for about 21 typical 3-minute uses.
The numbers
| Battery capacity | 768Wh (LFP) |
|---|---|
| Usable energy | 653Wh (85% via AC outlets) |
| Continuous AC output | 800W |
| Surge rating | 1600W |
| Blender running watts | 600W |
| Startup watts | 900W |
| Average draw | 600W |
| Estimated runtime | 1.1 hours |
| Energy per day of typical use | 30Wh |
768Wh × 0.85 = 653Wh usable ÷ 600W average = 1.1 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your blender and enter its real wattage.
Recharging with solar
The EcoFlow River 2 Pro accepts up to 220W of solar input. In real conditions that harvests about 825Wh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.
Solar can keep up. A blender uses about 30Wh a day at 0.05 hours of use, so with enough panels and good sun the EcoFlow River 2 Pro can run it indefinitely.
Tips
- Blenders run for seconds at a time, so energy is trivial; the motor surge at startup is what matters.
- You’ll still have about 200W of AC capacity left for other devices at the same time, though they’ll share the same battery.
- The EcoFlow River 2 Pro uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a blender
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| Jackery Explorer 500 | 518Wh | 500W | Won’t run | No |
| Anker SOLIX C800 Plus | 768Wh | 1200W | 1.1 hours | Yes |
| Bluetti AC70 | 768Wh | 1000W | 1.1 hours | Yes |
| Jackery Explorer 1000 | 1002Wh | 1000W | 1.4 hours | Yes |
| EcoFlow Delta 2 | 1024Wh | 1800W | 1.5 hours | Yes |
| DJI Power 1000 | 1024Wh | 2200W | 1.5 hours | Yes |
| Anker SOLIX C1000 | 1056Wh | 1800W | 1.5 hours | Yes |
| Jackery Explorer 1000 v2 | 1070Wh | 1500W | 1.5 hours | Yes |
FAQ
How long does the EcoFlow River 2 Pro take to recharge with solar?
With its maximum 220W of solar input it refills in about 4.7 hours of strong sun. With a single 200W panel, expect about 5.1 hours of full sun.