Can the EcoFlow Delta 3 Plus Run a Circular Saw?

Updated 2026-10-17 · Startup risk

Probably not reliably. Once running, a circular saw draws about 1400W, within the EcoFlow Delta 3 Plus’s 1800W rating. But its startup surge of roughly 2600W exceeds the station’s 2400W surge limit, so the inverter is likely to trip the moment the motor starts. If it does start, it would run for about 37 minutes.

The numbers

Battery capacity1024Wh (LFP)
Usable energy870Wh (85% via AC outlets)
Continuous AC output1800W
Surge rating2400W
Circular saw running watts1400W
Startup watts2600W
Average draw1400W
Estimated runtime37 minutes
Energy per day of typical use350Wh

1024Wh × 0.85 = 870Wh usable ÷ 1400W average = 0.6 hours

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your circular saw and enter its real wattage.

Recharging with solar

The EcoFlow Delta 3 Plus accepts up to 500W of solar input. In real conditions that harvests about 1.9 kWh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.

Solar can keep up. A circular saw uses about 350Wh a day at 0.25 hours of use, so with enough panels and good sun the EcoFlow Delta 3 Plus can run it indefinitely.

Tips

  • Corded 7¼-inch saws pull a big inrush when the blade spins up. That surge, not total energy, decides whether it works.
  • You’ll still have about 400W of AC capacity left for other devices at the same time, though they’ll share the same battery.
  • The EcoFlow Delta 3 Plus uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running a circular saw

Power stationCapacityOutputRuntimeVerdict
EcoFlow River 2 Pro768Wh800WWon’t runNo
Jackery Explorer 10001002Wh1000WWon’t runNo
EcoFlow Delta 21024Wh1800W37 minutesYes
DJI Power 10001024Wh2200W37 minutesYes
Anker SOLIX C10001056Wh1800W38 minutesStartup risk
Jackery Explorer 1000 v21070Wh1500W39 minutesYes
Bluetti AC1801152Wh1800W42 minutesYes
Jackery Explorer 1000 Plus1264Wh2000W46 minutesYes

Compare all power stations for a circular saw →

FAQ

How long does the EcoFlow Delta 3 Plus take to recharge with solar?

With its maximum 500W of solar input it refills in about 2.7 hours of strong sun. With a single 200W panel, expect about 6.8 hours of full sun.

Which power station can run a circular saw?

The EcoFlow Delta 2 (1024Wh, 1800W output) can, for about 37 minutes. See the comparison table below for more options.

More with the EcoFlow Delta 3 Plus

Everything the EcoFlow Delta 3 Plus can run →