Can the Bluetti EB3A Run a Rice Cooker?
Updated 2026-10-17 · No
No. A rice cooker draws about 700W, more than the Bluetti EB3A’s 600W continuous AC output. The inverter will overload and shut off as soon as it switches on.
The numbers
| Battery capacity | 268Wh (LFP) |
|---|---|
| Usable energy | 228Wh (85% via AC outlets) |
| Continuous AC output | 600W |
| Surge rating | 1200W |
| Rice cooker running watts | 700W |
| Startup watts | 700W |
| Average draw | 700W |
| Estimated runtime | Won’t run |
| Energy per day of typical use | 350Wh |
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your rice cooker and enter its real wattage.
Recharging with solar
The Bluetti EB3A accepts up to 200W of solar input. In real conditions that harvests about 750Wh on a sunny day (5 peak-sun hours).
Tips
- A 6-cup rice cooker draws full power for about 25 minutes, then drops to a low keep-warm mode.
- The Bluetti EB3A uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a rice cooker
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | Won’t run | No |
| EcoFlow River 2 | 256Wh | 300W | Won’t run | No |
| Jackery Explorer 240 v2 | 256Wh | 300W | Won’t run | No |
| Jackery Explorer 300 Plus | 288Wh | 300W | Won’t run | No |
| Anker SOLIX C300 | 288Wh | 300W | Won’t run | No |
| Goal Zero Yeti 500X | 505Wh | 300W | Won’t run | No |
| EcoFlow River 2 Max | 512Wh | 500W | Won’t run | No |
| Anker 535 PowerHouse | 512Wh | 500W | Won’t run | No |
FAQ
How long does the Bluetti EB3A take to recharge with solar?
With its maximum 200W of solar input it refills in about 1.8 hours of strong sun. A single 200W panel is enough to max out its solar input.
Which power station can run a rice cooker?
The DJI Power 500 (512Wh, 1000W output) can, for about 37 minutes. See the comparison table below for more options.