How Long Will the Bluetti EB3A Run a Corded Drill?
Updated 2026-10-17 · Yes
About 23 minutes. The Bluetti EB3A stores 268Wh, and a corded drill averages about 600W. That’s enough for about 1 typical 15-minute uses.
The numbers
| Battery capacity | 268Wh (LFP) |
|---|---|
| Usable energy | 228Wh (85% via AC outlets) |
| Continuous AC output | 600W |
| Surge rating | 1200W |
| Corded drill running watts | 600W |
| Startup watts | 900W |
| Average draw | 600W |
| Estimated runtime | 23 minutes |
| Energy per day of typical use | 150Wh |
268Wh × 0.85 = 228Wh usable ÷ 600W average = 0.4 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your corded drill and enter its real wattage.
Recharging with solar
The Bluetti EB3A accepts up to 200W of solar input. In real conditions that harvests about 750Wh on a sunny day (5 peak-sun hours).
Solar can keep up. A corded drill uses about 150Wh a day at 0.25 hours of use, so with enough panels and good sun the Bluetti EB3A can run it indefinitely.
Tips
- Corded drills draw 500–800W under load.
- The Bluetti EB3A uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a corded drill
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | Won’t run | No |
| EcoFlow River 2 | 256Wh | 300W | Won’t run | No |
| Jackery Explorer 240 v2 | 256Wh | 300W | Won’t run | No |
| Jackery Explorer 300 Plus | 288Wh | 300W | Won’t run | No |
| Anker SOLIX C300 | 288Wh | 300W | Won’t run | No |
| Goal Zero Yeti 500X | 505Wh | 300W | Won’t run | No |
| EcoFlow River 2 Max | 512Wh | 500W | Won’t run | No |
| Anker 535 PowerHouse | 512Wh | 500W | Won’t run | No |
FAQ
How long does the Bluetti EB3A take to recharge with solar?
With its maximum 200W of solar input it refills in about 1.8 hours of strong sun. A single 200W panel is enough to max out its solar input.