How Long Will the Anker SOLIX F3000 Run an Electric Hot Plate?
Updated 2026-10-17 · Yes
About 3.7 hours. The Anker SOLIX F3000 stores 3072Wh, and an electric hot plate averages about 700W because it cycles on roughly 70% of the time. That’s enough for about 7 typical 30-minute uses.
The numbers
| Battery capacity | 3072Wh (LFP) |
|---|---|
| Usable energy | 2611Wh (85% via AC outlets) |
| Continuous AC output | 3600W |
| Surge rating | 7200W |
| Electric hot plate running watts | 1000W |
| Startup watts | 1000W |
| Average draw | 700W |
| Estimated runtime | 3.7 hours |
| Energy per day of typical use | 350Wh |
3072Wh × 0.85 = 2611Wh usable ÷ 700W average = 3.7 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your electric hot plate and enter its real wattage.
Recharging with solar
The Anker SOLIX F3000 accepts up to 2400W of solar input. In real conditions that harvests about 9 kWh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.
Solar can keep up. An electric hot plate uses about 350Wh a day at 0.5 hours of use, so with enough panels and good sun the Anker SOLIX F3000 can run it indefinitely.
Tips
- Coil hot plates cycle their element to hold the set temperature.
- You’ll still have about 2600W of AC capacity left for other devices at the same time, though they’ll share the same battery.
- The Anker SOLIX F3000 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running an electric hot plate
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow Delta 2 Max | 2048Wh | 2400W | 2.5 hours | Yes |
| Anker SOLIX F2000 | 2048Wh | 2400W | 2.5 hours | Yes |
| Bluetti AC200L | 2048Wh | 2400W | 2.5 hours | Yes |
| Bluetti Elite 200 V2 | 2073Wh | 2600W | 2.5 hours | Yes |
| Jackery Explorer 3000 v2 | 3072Wh | 3000W | 3.7 hours | Yes |
| EcoFlow Delta Pro | 3600Wh | 3600W | 4.4 hours | Yes |
| Anker SOLIX F3800 | 3840Wh | 6000W | 4.7 hours | Yes |
| EcoFlow Delta Pro 3 | 4096Wh | 4000W | 5 hours | Yes |
FAQ
How long does the Anker SOLIX F3000 take to recharge with solar?
With its maximum 2400W of solar input it refills in about 1.7 hours of strong sun. With a single 200W panel, expect about 4.1 sunny days (20 hours of full sun).