How Long Will the Anker SOLIX F3000 Run a CPAP with Humidifier?
Updated 2026-10-17 · Yes
Medical equipment: these are estimates. Test your own setup and keep a backup plan.
The numbers
| Battery capacity | 3072Wh (LFP) |
|---|---|
| Usable energy | 2611Wh (85% via AC outlets) |
| Continuous AC output | 3600W |
| Surge rating | 7200W |
| CPAP with humidifier running watts | 60W |
| Startup watts | 60W |
| Average draw | 60W |
| Estimated runtime | 44 hours |
| Energy per day of typical use | 480Wh |
3072Wh × 0.85 = 2611Wh usable ÷ 60W average = 43.5 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your CPAP with humidifier and enter its real wattage.
Recharging with solar
The Anker SOLIX F3000 accepts up to 2400W of solar input. In real conditions that harvests about 9 kWh on a sunny day (5 peak-sun hours), or about 750Wh with one 200W panel.
Solar can keep up. A CPAP with humidifier uses about 480Wh a day at 8 hours of use, so with enough panels and good sun the Anker SOLIX F3000 can run it indefinitely.
Tips
- The heated humidifier roughly doubles a CPAP's power draw. Turning it down or off is the easiest way to get more nights per charge.
- You’ll still have about 3540W of AC capacity left for other devices at the same time, though they’ll share the same battery.
- The Anker SOLIX F3000 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a CPAP with humidifier
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow Delta 2 Max | 2048Wh | 2400W | 29 hours | Yes |
| Anker SOLIX F2000 | 2048Wh | 2400W | 29 hours | Yes |
| Bluetti AC200L | 2048Wh | 2400W | 29 hours | Yes |
| Bluetti Elite 200 V2 | 2073Wh | 2600W | 29 hours | Yes |
| Jackery Explorer 3000 v2 | 3072Wh | 3000W | 44 hours | Yes |
| EcoFlow Delta Pro | 3600Wh | 3600W | 2.1 days | Yes |
| Anker SOLIX F3800 | 3840Wh | 6000W | 2.3 days | Yes |
| EcoFlow Delta Pro 3 | 4096Wh | 4000W | 2.4 days | Yes |
FAQ
Will the Anker SOLIX F3000 run a CPAP with humidifier overnight?
Yes. Eight hours uses about 480Wh, roughly 18% of the Anker SOLIX F3000’s usable capacity.
How long does the Anker SOLIX F3000 take to recharge with solar?
With its maximum 2400W of solar input it refills in about 1.7 hours of strong sun. With a single 200W panel, expect about 4.1 sunny days (20 hours of full sun).
Is the Anker SOLIX F3000 safe for medical equipment?
These are estimates, not medical advice. Check your device’s actual power draw, test your setup before you rely on it, and always keep a backup plan approved by your doctor or equipment supplier.