Can the Anker SOLIX C300 Run a Vacuum Cleaner?
Updated 2026-10-17 · No
No. A vacuum cleaner draws about 1000W, more than the Anker SOLIX C300’s 300W continuous AC output. The inverter will overload and shut off as soon as it switches on.
The numbers
| Battery capacity | 288Wh (LFP) |
|---|---|
| Usable energy | 245Wh (85% via AC outlets) |
| Continuous AC output | 300W |
| Surge rating | 600W |
| Vacuum cleaner running watts | 1000W |
| Startup watts | 1400W |
| Average draw | 1000W |
| Estimated runtime | Won’t run |
| Energy per day of typical use | 500Wh |
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your vacuum cleaner and enter its real wattage.
Recharging with solar
The Anker SOLIX C300 accepts up to 100W of solar input. In real conditions that harvests about 375Wh on a sunny day (5 peak-sun hours).
Tips
- Corded upright vacuums draw 800–1,400W.
- The Anker SOLIX C300 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a vacuum cleaner
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | Won’t run | No |
| EcoFlow River 2 | 256Wh | 300W | Won’t run | No |
| Jackery Explorer 240 v2 | 256Wh | 300W | Won’t run | No |
| Bluetti EB3A | 268Wh | 600W | Won’t run | No |
| Jackery Explorer 300 Plus | 288Wh | 300W | Won’t run | No |
| Goal Zero Yeti 500X | 505Wh | 300W | Won’t run | No |
| EcoFlow River 2 Max | 512Wh | 500W | Won’t run | No |
| Anker 535 PowerHouse | 512Wh | 500W | Won’t run | No |
FAQ
How long does the Anker SOLIX C300 take to recharge with solar?
With its maximum 100W of solar input it refills in about 3.8 hours of strong sun. A single 200W panel is enough to max out its solar input.
Which power station can run a vacuum cleaner?
The Anker SOLIX C800 Plus (768Wh, 1200W output) can, for about 39 minutes. See the comparison table below for more options.