How Long Will the Anker SOLIX C300 Run a Computer Monitor?
Updated 2026-10-17 · Yes
About 8.2 hours. The Anker SOLIX C300 stores 288Wh, and a computer monitor averages about 30W. At 8 hours of use a day, one charge lasts about 1 day.
The numbers
| Battery capacity | 288Wh (LFP) |
|---|---|
| Usable energy | 245Wh (85% via AC outlets) |
| Continuous AC output | 300W |
| Surge rating | 600W |
| Computer monitor running watts | 30W |
| Startup watts | 30W |
| Average draw | 30W |
| Estimated runtime | 8.2 hours |
| Energy per day of typical use | 240Wh |
288Wh × 0.85 = 245Wh usable ÷ 30W average = 8.2 hours
Station specs: source, checked 2026-10-17. See how we calculate runtime.
Adjust the numbers
Check the label on your computer monitor and enter its real wattage.
Recharging with solar
The Anker SOLIX C300 accepts up to 100W of solar input. In real conditions that harvests about 375Wh on a sunny day (5 peak-sun hours).
Solar can keep up. A computer monitor uses about 240Wh a day at 8 hours of use, so with enough panels and good sun the Anker SOLIX C300 can run it indefinitely.
Tips
- A 24–27 inch LED monitor uses 20–40W.
- You’ll still have about 270W of AC capacity left for other devices at the same time, though they’ll share the same battery.
- The Anker SOLIX C300 uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.
Other power stations running a computer monitor
| Power station | Capacity | Output | Runtime | Verdict |
|---|---|---|---|---|
| EcoFlow River 3 | 245Wh | 300W | 6.9 hours | Yes |
| EcoFlow River 2 | 256Wh | 300W | 7.3 hours | Yes |
| Jackery Explorer 240 v2 | 256Wh | 300W | 7.3 hours | Yes |
| Bluetti EB3A | 268Wh | 600W | 7.6 hours | Yes |
| Jackery Explorer 300 Plus | 288Wh | 300W | 8.2 hours | Yes |
| Goal Zero Yeti 500X | 505Wh | 300W | 14 hours | Yes |
| EcoFlow River 2 Max | 512Wh | 500W | 15 hours | Yes |
| Anker 535 PowerHouse | 512Wh | 500W | 15 hours | Yes |
FAQ
Will the Anker SOLIX C300 run a computer monitor overnight?
Yes. Eight hours uses about 240Wh, roughly 98% of the Anker SOLIX C300’s usable capacity.
How long does the Anker SOLIX C300 take to recharge with solar?
With its maximum 100W of solar input it refills in about 3.8 hours of strong sun. A single 200W panel is enough to max out its solar input.