Can the Anker 535 PowerHouse Run an Electric Hot Plate?

Updated 2026-10-17 · No

No. An electric hot plate draws about 1000W, more than the Anker 535 PowerHouse’s 500W continuous AC output. The inverter will overload and shut off as soon as it switches on.

The numbers

Battery capacity512Wh (LFP)
Usable energy435Wh (85% via AC outlets)
Continuous AC output500W
Surge rating750W
Electric hot plate running watts1000W
Startup watts1000W
Average draw700W
Estimated runtimeWon’t run
Energy per day of typical use350Wh

Station specs: source, checked 2026-10-17. See how we calculate runtime.

Adjust the numbers

Check the label on your electric hot plate and enter its real wattage.

Recharging with solar

The Anker 535 PowerHouse accepts up to 120W of solar input. In real conditions that harvests about 450Wh on a sunny day (5 peak-sun hours).

Tips

  • Coil hot plates cycle their element to hold the set temperature.
  • The Anker 535 PowerHouse uses LiFePO4 (LFP) cells, rated for thousands of cycles, so running it down daily won’t wear it out quickly.

Other power stations running an electric hot plate

Power stationCapacityOutputRuntimeVerdict
Jackery Explorer 300 Plus288Wh300WWon’t runNo
Goal Zero Yeti 500X505Wh300WWon’t runNo
EcoFlow River 2 Max512Wh500WWon’t runNo
DJI Power 500512Wh1000W37 minutesYes
Jackery Explorer 500518Wh500WWon’t runNo
EcoFlow River 2 Pro768Wh800WWon’t runNo
Anker SOLIX C800 Plus768Wh1200W56 minutesYes
Bluetti AC70768Wh1000W56 minutesYes

Compare all power stations for an electric hot plate →

FAQ

How long does the Anker 535 PowerHouse take to recharge with solar?

With its maximum 120W of solar input it refills in about 5.7 hours of strong sun. A single 200W panel is enough to max out its solar input.

Which power station can run an electric hot plate?

The DJI Power 500 (512Wh, 1000W output) can, for about 37 minutes. See the comparison table below for more options.

More with the Anker 535 PowerHouse

Everything the Anker 535 PowerHouse can run →